1-1/4" Compact Ball Valve Gray PVC Socket (1014GS)

The 1014GS is a 1-1/4-inch compact gray PVC ball valve with socket end connections — a full-port, quarter-turn isolation valve engineered for permanent solvent-weld installation in the industrial, chemical process, water treatment, and commercial mechanical gray PVC piping systems where socket solvent-cement connections at 1-1/4-inch diameter serve new system construction isolation requirements and where corrosion-free gray PVC construction, compact body format, and the permanent bond integrity of solvent-weld end connections define the correct isolation valve specification at this intermediate pipe size.

The 1014GS is the socket-end companion to the 1014GT — the threaded NPT configuration in the same 1-1/4-inch compact gray PVC ball valve format. As established across the socket-end compact gray PVC ball valve descriptions, the socket configuration is the correct specification for new gray PVC system construction — the format that installs directly into the solvent-welded gray PVC piping run at the isolation valve location as a permanent bonded component of the system — while the threaded companion serves the more specific contexts where NPT threaded connections are present at the isolation valve location.

At 1-1/4-inch diameter, the socket configuration holds the same intermediate position in the compact gray PVC socket ball valve series that 1-1/4-inch holds across the complete Maxx-Supply valve and fitting catalog — a less-common design pipe size than the 1-inch and 1-1/2-inch sizes on either side of it, appearing where hydraulic calculations specifically produce intermediate sizing, where existing infrastructure is dimensioned at 1-1/4-inch, or where specific equipment connections require this diameter. The socket-threaded balance at 1-1/4-inch follows the socket-dominant pattern established at 1-1/2-inch and larger sizes — socket connections are the standard format at in-line 1-1/4-inch positions in new gray PVC system construction, with threading encountered at equipment connections and pump bodies but proportionally less common at in-line positions relative to socket-connected installation throughout new construction. The 1014GS is therefore the correct specification for new construction in-line 1-1/4-inch gray PVC socket isolation positions — and the 1014GT is the correct specification for 1-1/4-inch equipment connections and existing threaded system replacement contexts.

The 1014GS, 1014GT, 1014WS, and 1014WT complete the four-configuration set at 1-1/4-inch compact PVC ball valve specification — paralleling the four-configuration coverage established at 1-1/2-inch with the 1015GS, 1015GT, 1015WS, and 1015WT. The 1014GS occupies the gray PVC socket position in the 1-1/4-inch four-configuration set — the correct specification for in-line socket isolation positions in gray PVC industrial and chemical system construction at the 1-1/4-inch intermediate branch and equipment supply tier, serving the same buyer universe that specifies the 1014GT for threaded positions in gray PVC industrial systems and the 1014WS for socket positions in white PVC potable water and irrigation systems.

The intermediate size application profile of the 1014GS carries the same important nuance established for the 1025GS at 2-1/2-inch — the new construction application profile at 1-1/4-inch is narrower than at 1-1/2-inch and 1-inch because 1-1/4-inch is itself a less-common design pipe size in new system construction. Buyers specifying the 1014GS are working with a confirmed 1-1/4-inch design pipe size at the socket isolation valve location — the result of a specific hydraulic design decision, an existing 1-1/4-inch system being extended or modified, or a specific equipment connection layout that produces 1-1/4-inch intermediate branch sizing at the in-line isolation point. The 1014GS is the precision specification for these defined intermediate size socket isolation requirements — the correctly sized socket gray PVC compact ball valve for the 1-1/4-inch in-line socket positions that exist by deliberate design rather than as a default standard size selection.

The socket replacement context at 1-1/4-inch is meaningfully present for the 1014GS — in existing 1-1/4-inch gray PVC systems where socket-connected in-line ball valves at intermediate branch and equipment supply positions require replacement, the 1014GS provides direct socket replacement maintaining the original connection format. At 1-1/4-inch, the replacement context includes both industrial process systems and commercial plumbing systems where 1-1/4-inch was specified at specific intermediate branch positions and where socket-connected in-line isolation valves at those positions have reached end of service life requiring replacement with the correctly sized socket-connected gray PVC compact ball valve.

As the 1-1/4-inch socket counterpart to the 1015GS (1-1/2-inch), 1020GS (2-inch), 1025GS (2-1/2-inch), 1030GS (3-inch), and 1040GS (4-inch) in the described compact gray PVC socket ball valve series, the 1014GS extends the socket-end series below the 1-1/2-inch secondary distribution tier into the intermediate branch and individual equipment supply isolation tier — providing the correctly sized socket gray PVC compact ball valve for the 1-1/4-inch in-line socket positions in new gray PVC system construction and socket replacement contexts.

Gray PVC construction at 1-1/4-inch delivers the industrial convention consistency, chemical resistance, and corrosion-free service life appropriate for the intermediate branch line, intermediate process connection, and individual equipment supply isolation positions in new gray PVC system construction where the 1014GS serves socket-connected intermediate tier isolation requirements.

Specifications

Industries & Applications

The 1014GS is the 1-1/4-inch socket gray PVC compact ball valve specification for full-port quarter-turn isolation in new gray PVC system construction and socket-connected replacement contexts where 1-1/4-inch is the deliberate design pipe size at the in-line socket isolation valve location:

• New Industrial Gray PVC System Construction — 1-1/4-Inch Intermediate Branch & Equipment Supply In-Line Isolation — New gray PVC industrial system construction where hydraulic design produces 1-1/4-inch pipe sizing at specific intermediate branch and individual equipment supply isolation points between 1-inch individual connections and 1-1/2-inch secondary distribution branches; the 1014GS at in-line 1-1/4-inch socket intermediate branch and equipment supply isolation positions in new industrial gray PVC construction provides permanent socket-bonded full-port isolation at the intermediate branch tier where socket connection at in-line isolation positions is the standard construction method throughout new gray PVC industrial system installation at this diameter.
• Chemical Processing — 1-1/4-Inch Intermediate Branch Line In-Line Isolation — Intermediate branch line isolation in chemical processing facilities where new gray PVC socket-connected piping at 1-1/4-inch serves as intermediate distribution branches from 1-1/2-inch secondary process headers to individual process unit supply connections; the 1014GS at in-line 1-1/4-inch socket intermediate branch isolation positions in new chemical processing PVC system construction provides gray PVC chemical resistance and permanent socket bond integrity at intermediate chemical branch distribution isolation points.
• Water Treatment Plant — 1-1/4-Inch Intermediate Chemical Feed Branch In-Line Isolation — Intermediate chemical feed branch isolation in water treatment plant infrastructure where new gray PVC socket-connected piping at 1-1/4-inch serves as intermediate branch distribution from 1-1/2-inch primary branch lines to individual injection point supply connections; the 1014GS at in-line 1-1/4-inch socket intermediate chemical feed branch isolation positions in new treatment plant gray PVC construction where socket-connected in-line installation at intermediate branch isolation valve positions maintains connection format consistency with the surrounding socket-connected piping system.
• Industrial Pump Systems — 1-1/4-Inch Pump Connection In-Line Isolation — In-line isolation at 1-1/4-inch pump discharge and suction connections in small-to-medium industrial pump systems where new socket-connected gray PVC piping serves pump connection distribution at the intermediate pump connection size; the 1014GS compact body at in-line 1-1/4-inch socket pump connection isolation positions where socket-connected gray PVC is the system construction method at pump discharge and suction piping.
• HVAC Hydronic — 1-1/4-Inch Intermediate Branch & Equipment Connection In-Line Isolation — Intermediate branch supply connections and individual equipment supply isolation at 1-1/4-inch on HVAC chilled water and hydronic heating systems in new building construction where specific hydraulic calculations produce 1-1/4-inch sizing at intermediate branch and individual equipment supply in-line isolation positions; the 1014GS at in-line socket isolation positions in new HVAC hydronic intermediate branch construction at 1-1/4-inch within PVC material service conditions.
• Commercial Building — 1-1/4-Inch Intermediate Branch Supply Isolation in Socket PVC — Intermediate branch supply connections in commercial building gray PVC systems where new socket-connected piping at 1-1/4-inch serves specific hydraulically designed intermediate branch isolation positions between 1-inch individual connections and 1-1/2-inch secondary distribution; the 1014GS at in-line socket isolation positions in new commercial building gray PVC intermediate branch construction where socket-connected in-line valve installation at intermediate branch shutoff positions is standard in new construction at this diameter.
• Replacement — Existing 1-1/4-Inch Socket-Connected Gray PVC Systems — Replacement isolation valve for existing 1-1/4-inch socket-connected gray PVC in-line ball valves in industrial, commercial, and process systems at intermediate branch and equipment supply isolation positions; cut out the failed valve, cement in the replacement 1014GS with short pipe spools or union arrangement, restoring socket-connected isolation at the 1-1/4-inch intermediate position without converting the connection format; replacement demand at 1-1/4-inch spans both industrial process systems and commercial plumbing systems where 1-1/4-inch intermediate branch socket isolation valves have reached end of service life.
• Industrial Chemical Injection — 1-1/4-Inch Intermediate Branch In-Line Isolation — In-line isolation at 1-1/4-inch intermediate chemical injection branch connections in new socket-connected gray PVC chemical injection system construction where 1-1/4-inch is the branch size at intermediate injection distribution points between 1-1/2-inch primary branch lines and individual 1-inch injection connections; the 1014GS at in-line socket intermediate chemical injection branch isolation positions in new gray PVC chemical injection system construction.
• Agricultural Irrigation — 1-1/4-Inch Intermediate Zone Supply In-Line Isolation — Intermediate zone supply and sub-main branch isolation at 1-1/4-inch in agricultural and commercial irrigation systems where new socket-connected gray PVC piping at 1-1/4-inch serves specific intermediate zone supply isolation points; the 1014GS at in-line socket isolation positions in new gray PVC irrigation intermediate zone construction where hydraulic design produces 1-1/4-inch sizing at specific intermediate zone and sub-main branch positions.
• Industrial Aquaculture — 1-1/4-Inch Intermediate Distribution In-Line Isolation — In-line isolation at 1-1/4-inch intermediate distribution connections and individual recirculation circuit supply isolation in recirculating aquaculture systems where new socket-connected gray PVC piping serves specific intermediate flow distribution at 1-1/4-inch sizing between primary distribution and individual equipment connections; the 1014GS at in-line socket intermediate distribution isolation positions in new gray PVC aquaculture system construction.