3/4" Gray PVC Socket Gate Valve
$22.89
3/4" PVC gate valves provide reliable manual shutoff in a lightweight, corrosion-resistant design. Made from high-strength gray PVC, it’s ideal for clean-fluid handling in residential, commercial, and light-industrial PVC pipe systems.
Two Socket (Slip) ends simplify valve installation with primer and solvent cement, and a non-rising stem preserves vertical clearance in tight spaces. The easy-turn handwheel delivers positive on/off valve flow control without complex mechanisms—perfect for isolating lines during maintenance at an affordable price.
Technical Specifications
- Valve size: 3/4" (fits 3/4" nominal PVC pipe)
- Body material: Gray PVC (polyvinyl chloride)
- Connection type: Socket x Socket (solvent-weld)
- Stem type: Non-rising
- Seal material: EPDM O-rings
- Pressure rating: Up to 150 PSI (non-shock, water @ 73°F); see temperature derating for warmer fluids
- Temperature range: 40°F–140°F
- Handle: Handwheel
- Compliance: Suitable for potable water applications where certified by the manufacturer
- NOTE: Not suitable for compressed air or gas. Gate valves are not recommended for throttling.
Typical Applications
- Residential & commercial water distribution and shutoff
- Irrigation lines and greenhouse plumbing
- Aquariums and small water treatment setups
- Pool & spa isolation valves
- Non-pressurized chemical handling compatible with PVC/EPDM
- General-purpose flow isolation during service
Installation & Handling Tips
- Dry fit first, then mark insertion depth.
- Use PVC primer and solvent cement on clean, deburred pipe and sockets.
- Support adjacent piping to prevent stress on the valve body.
- Allow full cure time before pressurizing, then open/close the handwheel gently—do not overtighten.
- Install in the fully open position when solvent welding to avoid seat damage.
- For the best lifespan, use fully open or fully closed (avoid throttling).
Why Choose Maxx Supply?
- Wide selection of PVC plumbing fittings and valve sizes to match your build
- Durable products from trusted PVC valve manufacturers
- Competitive pricing and fast, coast-to-coast shipping
- Helpful customer service for sizing, valve pressure ratings, and application questions
- Your one-stop source for shutoff valves, fittings, primer/cement, and accessories
(No reviews yet)
Write a Review
3/4" Gray PVC Socket Gate Valve
3/4" PVC gate valves provide reliable manual shutoff in a lightweight, corrosion-resistant design. Made from high-strength gray PVC, it’s ideal for clean-fluid handling in residential, commercial, and light-industrial PVC pipe systems.
Two Socket (Slip) ends simplify valve installation with primer and solvent cement, and a non-rising stem preserves vertical clearance in tight spaces. The easy-turn handwheel delivers positive on/off valve flow control without complex mechanisms—perfect for isolating lines during maintenance at an affordable price.
Technical Specifications
- Valve size: 3/4" (fits 3/4" nominal PVC pipe)
- Body material: Gray PVC (polyvinyl chloride)
- Connection type: Socket x Socket (solvent-weld)
- Stem type: Non-rising
- Seal material: EPDM O-rings
- Pressure rating: Up to 150 PSI (non-shock, water @ 73°F); see temperature derating for warmer fluids
- Temperature range: 40°F–140°F
- Handle: Handwheel
- Compliance: Suitable for potable water applications where certified by the manufacturer
- NOTE: Not suitable for compressed air or gas. Gate valves are not recommended for throttling.
Typical Applications
- Residential & commercial water distribution and shutoff
- Irrigation lines and greenhouse plumbing
- Aquariums and small water treatment setups
- Pool & spa isolation valves
- Non-pressurized chemical handling compatible with PVC/EPDM
- General-purpose flow isolation during service
Installation & Handling Tips
- Dry fit first, then mark insertion depth.
- Use PVC primer and solvent cement on clean, deburred pipe and sockets.
- Support adjacent piping to prevent stress on the valve body.
- Allow full cure time before pressurizing, then open/close the handwheel gently—do not overtighten.
- Install in the fully open position when solvent welding to avoid seat damage.
- For the best lifespan, use fully open or fully closed (avoid throttling).
Why Choose Maxx Supply?
- Wide selection of PVC plumbing fittings and valve sizes to match your build
- Durable products from trusted PVC valve manufacturers
- Competitive pricing and fast, coast-to-coast shipping
- Helpful customer service for sizing, valve pressure ratings, and application questions
- Your one-stop source for shutoff valves, fittings, primer/cement, and accessories
