90 Degree Elbow, Slip x FPT PVC Schedule 80 2" (807-020)

The 807-020 is a 2" PVC Schedule 80 90 degree elbow in a slip x FPT (socket x female pipe thread) configuration. The slip end accepts 2" plain-end pipe for solvent welding, while the female-threaded outlet receives any compatible male-threaded fitting, nipple, valve, or equipment connection — delivering both a full 90° direction change and a solvent-weld-to-thread transition in a single fitting body.

The slip x FPT configuration is what distinguishes the 807-020 from the all-slip 806-030 in the Schedule 80 elbow family. Where the all-slip elbow creates a permanent solvent-weld joint on both ends, this fitting leaves the outlet end threaded and fully accessible. That threaded outlet is the practical advantage: any fitting, valve, or component connected at the FPT end can be removed and replaced without cutting into the pipe on either side of the elbow. At 2" in Schedule 80, this serviceability consideration is especially relevant — this size and schedule combination appears frequently at pump connections, chemical injection points, and equipment interfaces in industrial systems where the downstream component may require periodic replacement, calibration, or upgrade over the service life of the system.

The 90° geometry delivers a full perpendicular direction change — the most common elbow configuration in pressure piping — while the FPT outlet simultaneously transitions the assembly from solvent-weld to threaded construction at the same point. In many industrial and process installations, the main pipe run is assembled with solvent-weld joints for maximum pressure integrity, and the fitting terminates at a threaded equipment port or valve that requires a thread-to-thread engagement. The 807-020 achieves that transition cleanly and compactly at the direction change, eliminating the need for a separate slip 90° elbow followed by a male adapter or threaded union to reach the equipment connection.

Built to Schedule 80 wall thickness standards from rigid PVC compound, the 807-020 carries the elevated pressure ratings required for demanding industrial and commercial service. Thread sealant should be applied at the FPT end to ensure a leak-free connection under operating pressure. Like all Schedule 80 PVC fittings, it is fully resistant to corrosion, chemical attack, and biological fouling — with none of the weight, rust, or galvanic concerns associated with metal elbows of equivalent pressure rating.

Specifications:

Industries & Applications:

• Industrial Process Piping — Navigating a full 90° direction change on a 2" Schedule 80 process line while transitioning to a threaded equipment inlet, service valve, or instrument connection that requires future serviceability at the outlet
• Chemical Processing — Routing chemical feed, dosing, or recirculation lines around corners while terminating at a threaded valve, injection fitting, or equipment port that may need periodic replacement without cutting into the solvent-weld pipe run
• Water Treatment & Municipal — Directing 2" Schedule 80 treatment plant or pump station piping around structural obstructions while connecting to a threaded control valve, flow meter, or inline instrument at the direction change point
• Irrigation Systems — Changing direction on a 2" Schedule 80 solvent-weld mainline while connecting to a threaded master valve, backflow preventer, or pump port where the FPT outlet allows future equipment removal without pipe cutting
• Commercial Plumbing — Routing high-pressure 2" supply or process water lines around building structure while transitioning to a threaded service valve or equipment connection at the turn point where future access is a design consideration
• Industrial HVAC & Cooling — Directing 2" chilled water, cooling tower, or chemical treatment lines around mechanical space constraints while terminating at a threaded pump flange, heat exchanger port, or chemical injection valve