90 Degree Elbow, Slip x Slip PVC Schedule 80 2-1/2" (806-025)

The 806-025 is a 2-1/2" PVC Schedule 80 90° elbow in a slip x slip configuration, providing a permanent full-bore 90-degree change of direction in a 2-1/2" solvent-weld piping run. Both ends accept standard 2-1/2" pipe or spigot-end fittings for solvent cement bonding, making installation straightforward and consistent with standard Schedule 80 PVC assembly practice.

At the 2-1/2" size, the 806-025 is a large-diameter elbow by PVC fitting standards — handling the kind of high-flow mainline runs, pump discharge headers, and primary distribution circuits where a full-bore 90° turn must maintain system flow capacity without restriction at the change of direction. Both slip sockets are full-size for the pipe diameter, ensuring no reduction in bore or flow cross-section through the elbow body.

The 90° geometry is the standard choice when a piping run must make a right-angle turn — routing around structural elements, transitioning from horizontal to vertical runs, changing direction at equipment connections, and navigating the orthogonal geometry of most mechanical spaces and building structures. At 2-1/2", where pipe runs tend to serve primary supply and distribution functions rather than secondary laterals, the 90° elbow typically appears at major routing transitions in the system rather than at fine-tuning offset adjustments.

The all-slip design bonds both ports permanently with solvent cement, producing a clean, monolithic joint with no mechanical connections, threaded interfaces, or O-rings to maintain. At the 2-1/2" scale, the permanence of the solvent-weld joint is a meaningful advantage — large-diameter mechanical joints introduce more potential failure points than at smaller pipe sizes, and a properly executed solvent-weld elbow at this diameter provides long-term, maintenance-free joint integrity that is well-suited for buried systems, enclosed mechanical spaces, and high-flow applications where joint reliability is critical.

Schedule 80's thicker wall construction delivers higher pressure ratings and stronger resistance to mechanical stress and chemical exposure than Schedule 40, making this elbow a reliable choice for demanding industrial, chemical, and process piping environments. The gray color is the standard Schedule 80 identifier, providing clear visual differentiation from white Schedule 40 components in mixed systems.

Solvent cement installation follows standard PVC practice — clean, prime, and cement both mating surfaces per ASTM D2564 procedures. At 2-1/2", working efficiently is important — confirm the outlet orientation before cementing, as socket fits at this diameter leave limited adjustment time once bonded. Use of a heavy-bodied cement is recommended at this size to ensure adequate fill across the larger socket surface.

Specifications:

Industries & Applications:

The 806-025 is well-suited for any Schedule 80 system requiring a permanent, full-bore 90-degree direction change in a 2-1/2" solvent-weld mainline or high-flow distribution run:

• Industrial Processing — Right-angle routing transitions in 2-1/2" process piping headers, pump discharge runs, and primary equipment feed lines where a full-bore permanent 90° turn is required at major routing changes in high-flow industrial systems
• Chemical Handling — Permanent 90° direction changes in acid, alkali, and reagent distribution lines at the 2-1/2" mainline level, where solvent-weld joint integrity at large-diameter turns is critical for long-term leak prevention in chemically aggressive environments
• Water & Wastewater Treatment — Full-bore 90° transitions in treatment plant supply and distribution piping, pump station headers, and process water mains where large-diameter routing changes require a pressure-rated, permanent solvent-weld elbow
• Irrigation & Agriculture — Right-angle routing transitions in 2-1/2" pressurized mainline irrigation systems at header-to-lateral junctions, pump station outlet runs, and primary field supply lines where permanent buried 90° elbows are required at major routing changes
• Commercial & Industrial Plumbing — Full-bore 90° direction changes in cold water mains, equipment supply headers, and mechanical room primary distribution piping at the 2-1/2" scale where Schedule 80 construction is specified
• Aquaculture & Aquatics — Major 90° routing transitions in 2-1/2" recirculating system primary headers, pump discharge runs, and main filter supply lines in large-scale systems where permanent solvent-weld elbows at high-flow routing changes are required
• Pool & Spa — Right-angle routing transitions in commercial pool primary circulation and equipment supply piping where 2-1/2" Schedule 80 solvent-weld construction is used throughout the mechanical system
• HVAC & Cooling Systems — Full-bore 90° direction changes in large-diameter chilled water and process cooling primary distribution circuits where PVC Schedule 80 is specified and routing transitions at the 2-1/2" mainline level require permanent, pressure-rated elbows