Reducing Tee, Slip x Slip x Slip PVC Schedule 80 2" x 2" x 1" (801-249)

The 801-249 is a 2" x 2" x 1" PVC Schedule 80 reducing tee in an all-slip configuration, featuring 2" slip inlets on both run ends and a 1" slip branch outlet. Sitting at the midpoint of the 801-series 2" run family, this fitting introduces a substantial solvent-weld branch into a 2" mainline — a branch-to-run ratio that is well-balanced for secondary supply lines, parallel circuit takeoffs, equipment feed branches, and other applications where the branch carries meaningful flow volume without fully matching mainline capacity.

At 1" off a 2" run, the 801-249 occupies a practical middle ground: the branch is large enough to handle significant flow — pumps, filter circuits, equipment inlets, bypass loops — yet the mainline retains clear flow priority. This makes the fitting a natural fit for systems where a single 2" header serves both a primary distribution function and a substantial secondary branch simultaneously.

The all-slip design means all three ports are joined by solvent cement, producing a fully permanent, monolithic assembly with no threaded joints to loosen, leak, or require periodic re-torquing. This is a particular advantage in installations where long-term joint integrity matters more than branch serviceability — buried systems, enclosed mechanical spaces, chemical environments with aggressive media, and any installation where future access to the branch joint would be difficult or disruptive.

Schedule 80's thicker wall construction delivers higher pressure ratings and stronger resistance to mechanical stress and chemical exposure than Schedule 40, making this tee well-suited for demanding industrial, chemical, and process piping environments. The gray color is the standard Schedule 80 identifier, providing immediate visual differentiation from white Schedule 40 components in mixed systems.

Solvent cement installation follows standard PVC practice — clean, prime, and cement all mating surfaces per ASTM D2564 procedures. Ensure proper alignment before the cement sets, as Schedule 80 socket fits leave minimal adjustment time once bonded.

Specifications:

Industries & Applications:

The 801-249 is well-suited for Schedule 80 systems requiring a substantial, permanent solvent-weld branch takeoff from a 2" mainline where meaningful flow volume is carried at the branch:

• Industrial Processing — Mid-bore branch connections for secondary supply lines, bypass circuits, and equipment feed ports off a 2" process header, where the 1" branch carries significant flow and a permanent solvent-weld assembly is preferred for long-term reliability
• Chemical Handling — Permanent high-flow branch connections in acid, alkali, and reagent distribution systems — particularly for tank fill lines, transfer circuits, or secondary distribution headers where a 1" branch delivers adequate flow capacity
• Water & Wastewater Treatment — Branching off 2" treatment plant supply or distribution headers to 1" pump inlets, filter connections, equipment feeds, and isolation valve assemblies in fully solvent-welded installations
• Irrigation & Agriculture — High-volume lateral takeoffs in pressurized mainline irrigation systems where a 1" solvent-weld branch supplies a major zone header or secondary distribution manifold off a 2" mainline
• Commercial & Industrial Plumbing — Substantial branch connections for equipment isolation circuits, bypass assemblies, and secondary supply lines in cold water and mechanical room piping requiring a permanent, pressure-rated fitting
• Aquaculture & Aquatics — High-flow branch connections for major filter returns, pump bypass lines, and recirculating system secondary circuits off 2" system headers in permanent solvent-weld installations
• HVAC & Cooling Systems — Mid-bore branch takeoffs in chilled water or process cooling distribution circuits where the secondary loop requires meaningful flow capacity off a 2" header