Tee, Slip x Slip x FPT PVC Schedule 80 2" (802-020)
$13.07
The 802-020 is a 2" PVC Schedule 80 tee in a slip x slip x FPT configuration — two solvent-weld slip sockets on the straight run and a female-threaded (FPT) branch outlet at 90°. The slip ends accept 2" plain-end pipe for solvent welding to form the permanent main run, while the FPT branch port receives any compatible male-threaded fitting, valve, instrument, or equipment connection without additional adapters.
The combination of solvent-weld run connections and a threaded branch is what makes the 802-020 a practical specialty fitting. In many commercial and industrial systems, the main pipe run is assembled with solvent-weld joints for maximum strength and leak integrity, while the branch point needs to remain accessible — for a threaded valve that may require replacement, a pressure gauge that needs periodic calibration, a chemical injection port, or any other connection that benefits from a threaded, removable interface rather than a permanent solvent-weld joint. The 802-020 delivers exactly that combination in a single fitting.
Built to Schedule 80 wall thickness standards from rigid PVC compound, this tee carries the elevated pressure ratings required for demanding industrial and commercial service. The 90° branch geometry produces a direct, perpendicular takeoff from the main run — standard for most branching applications where a wye angle is not required by code or flow design.
Like all Schedule 80 PVC fittings, the 802-020 is fully resistant to corrosion, chemical attack, and biological fouling — with none of the weight, rust, or galvanic concerns that come with metal tee fittings of equivalent size and pressure rating.
Specifications:
| Attribute | Detail |
|---|---|
| Part Number | 802-020 |
| Material | PVC (Polyvinyl Chloride) |
| Schedule / Pressure Class | Schedule 80 |
| End Connections | Slip (Socket) x Slip (Socket) x FPT (Female Pipe Thread) |
| Fitting Type | Tee |
| Branch Angle | 90° |
| Pipe Size | 2" (all ports) |
| Color | Dark Gray |
| Applicable Standard | ASTM D2467 |
| NSF Listed | NSF 61 (potable water) |
| Temperature Range | Up to 140°F (60°C) at rated pressure |
| Manufacturer | Spears Manufacturing |
Industries & Applications:
- Industrial Process Piping — Branching off a solvent-weld 2" process main to a threaded valve, gauge port, or instrumentation connection that requires periodic removal or replacement
- Chemical Processing — Tapping a threaded chemical injection, sampling, or metering port into a permanent solvent-weld PVC distribution header
- Water Treatment & Municipal — Installing threaded branch connections for pressure gauges, chemical dosing inlets, or sample taps on Schedule 80 treatment plant piping
- Irrigation Systems — Adding a threaded branch valve or pressure regulation fitting to a solvent-weld 2" mainline without cutting in a separate adapter
- Commercial Plumbing — Creating a threaded service branch on a high-pressure solvent-weld PVC run for isolation valves or equipment connections in mechanical rooms
- Industrial HVAC & Cooling — Installing threaded instrumentation or chemical treatment ports into solvent-weld cooling water or chilled water PVC piping systems
(No reviews yet)
Write a Review
Tee, Slip x Slip x FPT PVC Schedule 80 2" (802-020)
The 802-020 is a 2" PVC Schedule 80 tee in a slip x slip x FPT configuration — two solvent-weld slip sockets on the straight run and a female-threaded (FPT) branch outlet at 90°. The slip ends accept 2" plain-end pipe for solvent welding to form the permanent main run, while the FPT branch port receives any compatible male-threaded fitting, valve, instrument, or equipment connection without additional adapters.
The combination of solvent-weld run connections and a threaded branch is what makes the 802-020 a practical specialty fitting. In many commercial and industrial systems, the main pipe run is assembled with solvent-weld joints for maximum strength and leak integrity, while the branch point needs to remain accessible — for a threaded valve that may require replacement, a pressure gauge that needs periodic calibration, a chemical injection port, or any other connection that benefits from a threaded, removable interface rather than a permanent solvent-weld joint. The 802-020 delivers exactly that combination in a single fitting.
Built to Schedule 80 wall thickness standards from rigid PVC compound, this tee carries the elevated pressure ratings required for demanding industrial and commercial service. The 90° branch geometry produces a direct, perpendicular takeoff from the main run — standard for most branching applications where a wye angle is not required by code or flow design.
Like all Schedule 80 PVC fittings, the 802-020 is fully resistant to corrosion, chemical attack, and biological fouling — with none of the weight, rust, or galvanic concerns that come with metal tee fittings of equivalent size and pressure rating.
Specifications:
| Attribute | Detail |
|---|---|
| Part Number | 802-020 |
| Material | PVC (Polyvinyl Chloride) |
| Schedule / Pressure Class | Schedule 80 |
| End Connections | Slip (Socket) x Slip (Socket) x FPT (Female Pipe Thread) |
| Fitting Type | Tee |
| Branch Angle | 90° |
| Pipe Size | 2" (all ports) |
| Color | Dark Gray |
| Applicable Standard | ASTM D2467 |
| NSF Listed | NSF 61 (potable water) |
| Temperature Range | Up to 140°F (60°C) at rated pressure |
| Manufacturer | Spears Manufacturing |
Industries & Applications:
- Industrial Process Piping — Branching off a solvent-weld 2" process main to a threaded valve, gauge port, or instrumentation connection that requires periodic removal or replacement
- Chemical Processing — Tapping a threaded chemical injection, sampling, or metering port into a permanent solvent-weld PVC distribution header
- Water Treatment & Municipal — Installing threaded branch connections for pressure gauges, chemical dosing inlets, or sample taps on Schedule 80 treatment plant piping
- Irrigation Systems — Adding a threaded branch valve or pressure regulation fitting to a solvent-weld 2" mainline without cutting in a separate adapter
- Commercial Plumbing — Creating a threaded service branch on a high-pressure solvent-weld PVC run for isolation valves or equipment connections in mechanical rooms
- Industrial HVAC & Cooling — Installing threaded instrumentation or chemical treatment ports into solvent-weld cooling water or chilled water PVC piping systems
- Part #:
- 802-020
- Product Family:
- Sch 80 PVC
- Carton Qty:
- 5
- Pallet Qty:
- 660
- Size:
- 2"
