Tee, Slip X Slip X Slip 10" (C601-100)

Blue Monster 76037 1-Step PVC Cement Clear (32OZ)

The C601-100 is a 10" Class 125 PVC full-size tee with slip socket connections on all three outlets. All three sockets are equal at 10", making the C601-100 the correct fitting when the branch carries the same nominal flow capacity as the main run — a full-capacity junction where the system splits, converges, or taps a secondary main of equal diameter rather than stepping down to a smaller lateral or instrument connection.

The full-size tee at 10" is a foundational fitting in large-diameter distribution system architecture. It appears wherever a 10" trunk main must branch to an equal-diameter secondary header, wherever two 10" feed lines converge into a single main, and wherever a system loop requires an in-line branch point that maintains full 10" flow capacity on all three outlets simultaneously. In tiered distribution networks — municipal water systems, large-scale irrigation, industrial process water headers — the 10" full-size tee defines the branch points at the primary distribution tier, above which sit the trunk mains and below which sit the reduced-diameter zone headers fed by bushing and reducing tee assemblies.

The Class 125 pressure designation positions this fitting precisely within its intended application envelope. At 10", Class 125 covers the substantial majority of large-diameter PVC piping use cases: gravity-flow drainage, low-to-moderate pressure municipal water distribution, large-scale irrigation mains, stormwater conveyance, and industrial cooling and process water headers all routinely operate at or below 125 PSI. For these systems, Class 125 delivers the correct pressure capacity at a cost and wall thickness appropriate to the service requirement — without the over-specification of Schedule 40 construction where the additional wall thickness and pressure margin are not required by the system design.

All three 10" slip sockets accept standard IPS-dimension PVC pipe bonded with heavy-bodied PVC solvent cement — the correct grade at large diameters where socket depth, cement coverage area, and cure time are substantially greater than small-bore applications. Manufactured from virgin PVC compound to ASTM D2466, the C601-100 carries the white color standard for PVC pressure fittings and is NSF/ANSI 61 listed for potable water service, qualifying it for municipal water distribution, commercial irrigation, and industrial process piping applications.

Specifications:

Industries & Applications:

• Municipal Water Distribution — Full-capacity branch junctions on 10" water distribution mains and transmission line networks where equal-diameter branching is required for zone header splits, system loop connections, and primary distribution branch points operating within Class 125 pressure limits
• Large-Scale Irrigation & Agriculture — Equal-diameter branch junctions on 10" irrigation supply mains, pivot system primary feed lines, and large agricultural and commercial landscape distribution headers where both the run and branch carry full 10" flow capacity to supply equal-demand zone circuits or sector headers
• Stormwater & Drainage Management — Full-capacity branch and convergence junctions on 10" gravity-flow stormwater collection, conveyance, and detention system mains where equal-diameter branch connections support balanced collection network architecture within Class 125 pressure capacity
• Industrial Cooling & Process Water — Equal-diameter branch junctions on 10" low-to-moderate pressure process water, cooling tower supply, and plant utility fluid distribution headers where full 10" flow capacity on all three outlets supports balanced zone distribution across equipment circuits
• Water & Wastewater Treatment — Full-capacity distribution header branch junctions on 10" treatment plant process water, effluent distribution, and utility water mains where equal-diameter branching supports balanced flow distribution across treatment process zones and secondary distribution circuits
• Landscape & Commercial Irrigation — Primary distribution branch junctions on 10" supply headers for golf courses, sports complexes, parks, and large commercial landscape installations where equal-capacity branching at the primary distribution tier feeds equal-demand zone circuits operating within Class 125 pressure limits
• Aquaculture & Recirculating Systems — Full-capacity branch junctions on 10" supply and return headers in large commercial aquaculture, hatchery, and industrial water treatment facilities where equal-diameter tee branching supports balanced flow distribution across zone circuits without restricting branch flow capacity
• Fire Suppression Support & Site Utility — Equal-diameter branch junctions on 10" low-pressure underground utility runs and site water distribution mains on commercial and campus-scale installations where full-capacity branching at Class 125 pressure is appropriate for the system design requirement