Wye, Slip x Slip x Slip PVC Schedule 40 2" (475-020)
$4.85
The 475-020 is a 2" PVC Schedule 40 wye fitting in a full slip (socket) configuration across all three ports. All connections accept 2" plain-end pipe for solvent welding, producing permanent, leak-free joints throughout the assembly without the need for threaded transitions or mechanical couplings.
The wye configuration splits or combines flow at an angled branch — typically 45° off the main run — rather than the sharp 90° intersection of a tee. This geometry produces a smoother, more gradual flow transition, which reduces turbulence and pressure drop at the branch point. That characteristic makes the wye the preferred fitting over a tee in drainage, low-pressure gravity flow, and any application where minimizing resistance at the junction is a design or code consideration.
Built from virgin PVC compound to Schedule 40 dimensional standards, the 475-020 delivers reliable performance in standard commercial and light industrial service. The all-slip design creates a fully solvent-welded assembly on all three ports — with no threads to corrode, loosen, or leak under flow cycling or thermal movement.
Like all Schedule 40 PVC fittings, the 475-020 is lightweight, corrosion-proof, and fully resistant to biological fouling and a broad range of chemicals encountered in plumbing and process applications.
Specifications:
| Attribute | Detail |
|---|---|
| Part Number | 475-020 |
| Material | PVC (Polyvinyl Chloride) |
| Schedule / Pressure Class | Schedule 40 |
| End Connections | Slip (Socket) x Slip (Socket) x Slip (Socket) |
| Fitting Type | Wye (Y-Branch) |
| Branch Angle | 45° |
| Pipe Size | 2" (all ports) |
| Color | White |
| Applicable Standard | ASTM D2466 |
| NSF Listed | NSF 61 (potable water) |
| Temperature Range | Up to 140°F (60°C) at rated pressure |
| Manufacturer | Spears Manufacturing |
Industries & Applications:
- Drain, Waste & Vent (DWV) Systems — Joining branch drain lines to a main stack or horizontal run where the 45° wye geometry supports proper flow and meets plumbing code requirements
- Commercial Plumbing — Splitting or combining flow in above-grade and below-grade drainage assemblies throughout commercial construction
- Irrigation Systems — Creating three-way distribution points on 2" mainlines where a low-turbulence branch split is preferred over a tee
- Industrial Process Piping — Branching process fluid lines where smooth flow transition at the junction reduces wear on downstream components
- Water Treatment & Municipal — Distributing flow across parallel process paths or sampling loops in treatment plant piping
- Agriculture — Splitting irrigation supply lines to feed multiple zones or distribution headers from a single 2" mainline
(No reviews yet)
Write a Review
Wye, Slip x Slip x Slip PVC Schedule 40 2" (475-020)
The 475-020 is a 2" PVC Schedule 40 wye fitting in a full slip (socket) configuration across all three ports. All connections accept 2" plain-end pipe for solvent welding, producing permanent, leak-free joints throughout the assembly without the need for threaded transitions or mechanical couplings.
The wye configuration splits or combines flow at an angled branch — typically 45° off the main run — rather than the sharp 90° intersection of a tee. This geometry produces a smoother, more gradual flow transition, which reduces turbulence and pressure drop at the branch point. That characteristic makes the wye the preferred fitting over a tee in drainage, low-pressure gravity flow, and any application where minimizing resistance at the junction is a design or code consideration.
Built from virgin PVC compound to Schedule 40 dimensional standards, the 475-020 delivers reliable performance in standard commercial and light industrial service. The all-slip design creates a fully solvent-welded assembly on all three ports — with no threads to corrode, loosen, or leak under flow cycling or thermal movement.
Like all Schedule 40 PVC fittings, the 475-020 is lightweight, corrosion-proof, and fully resistant to biological fouling and a broad range of chemicals encountered in plumbing and process applications.
Specifications:
| Attribute | Detail |
|---|---|
| Part Number | 475-020 |
| Material | PVC (Polyvinyl Chloride) |
| Schedule / Pressure Class | Schedule 40 |
| End Connections | Slip (Socket) x Slip (Socket) x Slip (Socket) |
| Fitting Type | Wye (Y-Branch) |
| Branch Angle | 45° |
| Pipe Size | 2" (all ports) |
| Color | White |
| Applicable Standard | ASTM D2466 |
| NSF Listed | NSF 61 (potable water) |
| Temperature Range | Up to 140°F (60°C) at rated pressure |
| Manufacturer | Spears Manufacturing |
Industries & Applications:
- Drain, Waste & Vent (DWV) Systems — Joining branch drain lines to a main stack or horizontal run where the 45° wye geometry supports proper flow and meets plumbing code requirements
- Commercial Plumbing — Splitting or combining flow in above-grade and below-grade drainage assemblies throughout commercial construction
- Irrigation Systems — Creating three-way distribution points on 2" mainlines where a low-turbulence branch split is preferred over a tee
- Industrial Process Piping — Branching process fluid lines where smooth flow transition at the junction reduces wear on downstream components
- Water Treatment & Municipal — Distributing flow across parallel process paths or sampling loops in treatment plant piping
- Agriculture — Splitting irrigation supply lines to feed multiple zones or distribution headers from a single 2" mainline
- Part #:
- 475-020
- Product Family:
- Sch 40 PVC
- Carton Qty:
- 10
- Pallet Qty:
- 640
- Size:
- 2"
