10" Slip Flange (Loose Ring), Schedule 80 PVC (854-100FT)

The 10" PVC Schedule 80 Slip Loose Ring Flange (854-100FT) is a heavy-duty, two-piece Van Stone-style flanged connection fitting built for large-diameter industrial and municipal piping systems that demand bolted, serviceable joints in chemically aggressive or high-purity environments. The assembly pairs a slip (socket) stub end — solvent welded permanently onto the pipe — with a free-rotating PVC backing ring that spins independently until the bolts are drawn down, allowing full 360° bolt hole alignment to any mating flange without twisting, repositioning, or stressing the pipeline upstream. This 10” Slip Flange SCH 80 design allows bolt alignment without rotating or repositioning the pipe run, making it a practical PVC flange option for large-diameter piping systems where field alignment is difficult.

At 10", the free-rotating backing ring is not merely a convenience feature — it is a practical installation necessity. Ten-inch pipe is heavy, rigid, and difficult to maneuver in the confined mechanical rooms, pump vaults, valve chambers, and equipment bays where flanged connections are most commonly required. Fixed flanges demand that the pipe run be pre-oriented during installation so the bolt holes align with the mating flange — a precision requirement that becomes increasingly difficult to meet as pipe diameter, pipe weight, and installation space constraints increase simultaneously. Loose ring flanges are especially valuable on large-diameter piping systems where pipe weight and space constraints make bolt alignment difficult. The free-rotating flange ring lets installers align the bolt holes at final assembly, minimizing strain on the pipe, fitting, and connected equipment. The loose ring flange decouples pipe positioning from bolt circle alignment entirely: weld the stub end, route and support the pipe, then rotate the backing ring to the correct orientation at final assembly. The bolt holes align to the mating flange regardless of how the pipe run is oriented, saving significant installation labor on initial construction and every subsequent reassembly during the service life of the system.

The all-PVC construction keeps every wetted surface free of metal — eliminating galvanic corrosion at the flange face, metal ion contamination in high-purity water systems, and the dezincification and rust degradation that affect metallic flanges in chemically treated or saline service environments. Schedule 80 wall thickness provides the structural depth and pressure capacity required beyond Schedule 40 limits at this diameter, and the flat face flange surface mates correctly with full-face gaskets to distribute bolt load uniformly across the sealing face without concentrating stress at the inner edge of the flange bore — a critical detail for maintaining long-term seal integrity on PVC flange faces under repeated assembly and disassembly cycles.

Drilled to the 150 lb. ANSI/ASME B16.5 pattern , the 854-100FT is dimensionally compatible with standard metal and PVC companion flanges, pump discharge flanges, butterfly valve wafer ends, and inline equipment connections across the full range of municipal, industrial, and chemical process applications at 10". Use full-face flange gaskets and proper bolt torque sequencing during flange installation to maintain seal integrity. This is especially important when connecting Schedule 80 fittings, valves, and other pipe fittings in systems that might be opened for maintenance or inspection. The ANSI 150 drilling pattern at this size is effectively universal for standard-pressure flanged PVC piping — ensuring direct dimensional compatibility with the pumps, valves, meters, and process equipment that 10" systems are designed around, without custom drilling or adapter hardware.

Specifications:

Industries & Applications:

Chemical Processing & Industrial Fluid Handling: Large-diameter chemical transfer headers at 10" require flanged break points for pump maintenance, heat exchanger cleaning, inline filter replacement, and equipment changeouts on defined maintenance schedules. The all-PVC wetted path of the 854-100FT resists the concentrated acids, caustic solutions, chlorinated compounds, and oxidizing process fluids that corrode and pit metallic flange faces over time, while the free-rotating backing ring eliminates the alignment difficulty inherent to heavy, rigid 10" chemical pipe runs in confined processing structures. Where a flanged connection will be broken and reassembled repeatedly over the system's service life, the loose ring design's ability to realign bolt holes without repositioning the pipe run delivers meaningful labor savings on every reassembly cycle.

Municipal Water & Wastewater Treatment: Pump station headers, clarifier inlet and outlet connections, filter influent and effluent piping, and chemical dosing system mains in water and wastewater treatment plants are standard environments for 10" flanged PVC. The loose ring design is especially practical at pump flanges and butterfly valve connections where bolt circle alignment to a fixed equipment flange must be achieved against the fixed position of already-installed 10" pipe. The NSF/ANSI 61 certification confirms suitability for potable water contact in municipal water treatment and distribution applications, and the ANSI 150 drilling pattern ensures direct compatibility with the full range of pumps, gate valves, and butterfly valves standard to municipal water infrastructure at this size.

Industrial Cooling & Process Water Systems: Cooling tower distribution mains, chiller plant supply and return headers, and closed-loop recirculating cooling systems use Schedule 80 PVC flanges at 10" where chemical treatment agents make metallic piping unsuitable for long-term service. Flanged connections at cooling tower cells, heat exchangers, and inline strainers allow major components to be isolated and removed for seasonal maintenance without cutting the primary distribution main. The loose ring's rotational freedom simplifies reassembly at equipment flanges with fixed bolt circle orientations after each maintenance event — a practical advantage in cooling systems where flanged joints are broken annually for equipment inspection and cleaning.

Power Generation & High-Purity Utility Piping: Demineralized water distribution headers, condensate polishing loops, and service water systems in power generation facilities use 10" Schedule 80 PVC flanges where ultra-pure water must be conveyed without metal ion contribution to the process stream. Flanged connections at ion exchange vessels, ultrafiltration skids, and membrane treatment systems allow process equipment to be isolated and replaced during planned outages without cutting the primary distribution header. The loose ring design is particularly practical in power plant piping where equipment layout fixes the orientation of equipment flanges and bolt hole alignment on large-diameter connections must be achieved without repositioning rigid pipe runs in congested turbine hall and auxiliary building piping galleries.

Large-Scale Agricultural & Industrial Irrigation: Pump station discharge headers at 10" in large agricultural irrigation systems — center pivot supply mains, canal pump stations, and commercial greenhouse primary distribution headers — connect to downstream piping via flanged joints at pump outlets, filter stations, and mainline isolation valves. The rotating backing ring is especially practical at pump discharge flanges where the bolt circle orientation is fixed by the pump casing and must be matched by the discharge header flange without repositioning the already-installed pipe run. Flanged connections at filter stations and isolation valves allow these components to be removed for cleaning, maintenance, and seasonal winterization without disturbing the buried mainline.

Mining & Mineral Processing: Process water mains, leach solution distribution headers, and reagent supply lines at 10" in mining and mineral processing operations use Schedule 80 PVC flanges where the highly corrosive hydrometallurgical process solutions involved rapidly degrade metallic alternatives. Flanged connections at pump stations, settling tank connections, and inline treatment equipment allow sections to be isolated and replaced as chemical attack or mechanical wear dictates. The loose ring design simplifies maintenance at remote pump stations and processing structures where working space is constrained and efficient bolt hole alignment on large-diameter flanges reduces the time crews spend on scheduled maintenance at remote site locations.