2" X 2" X 1/8" X 20' 6063-T52 MF ARCH ANGLE - 11-63-315
$36.33
Call for more information: 803-329-6299
Click here for map: 1439-51 Dave Lyle Blvd, Rock Hill, SC. 29730
This 2" x 2" x 1/8" aluminum architectural angle delivers the clean lines and consistent surface quality required for trim, edging, framing, and finish-work applications where appearance is as important as function. Extruded from 6063-T52 aluminum, this equal-leg angle is specifically produced to architectural tolerances, featuring a sharper inside corner radius than standard structural angle — a defining characteristic that results in tighter, more refined joints and transitions in visible installations.
The 6063 alloy is widely regarded as the premier choice for architectural aluminum extrusions. Its high magnesium-silicon content produces a smooth, consistent surface that accepts anodizing, powder coating, and paint finishes with excellent adhesion and uniformity — making it the go-to specification for work where the aluminum will remain exposed or receive a decorative finish. The T52 temper designates material that has been cooled from the extrusion process and stress relieved, producing a stable, dimensionally consistent profile well-suited for precision fitting and finishing trades.
Supplied in mill finish (MF), this angle arrives with the natural extruded aluminum surface intact, free of applied coatings, and ready for immediate fabrication, anodizing, or finishing as required by the application. The 20-foot bar length minimizes field splices in linear trim runs and reduces material waste on longer spans.
This angle is suited for light-duty structural support roles in non-primary framing but is principally specified for architectural, decorative, and finish applications rather than load-bearing structural service. For structural load-bearing angles, 6061-T6 should be considered.
Specifications:
| Attribute | Value |
|---|---|
| Part Number | 11-63-315 |
| Leg Size | 2 in × 2 in (equal leg) |
| Wall Thickness | 1/8 in (0.125 in) |
| Length | 20 ft (240 in) |
| Profile Type | Architectural Angle |
| Alloy | 6063 |
| Temper | T52 |
| Surface Finish | Mill Finish (MF) |
| Inside Corner | Sharp / Architectural Radius |
| Cross-Sectional Area | Approx. 0.484 in² |
| Weight (per bar) | Approx. 0.57 lb/ft × 20 ft ≈ 11.4 lbs |
| Governing Standard | ASTM B221 |
| Alloy Characteristics | High surface quality, excellent anodize response, good corrosion resistance |
Industries & Applications:
6063-T52 architectural aluminum angle is specified across construction, design, and fabrication trades wherever a clean aluminum profile is required:
- Architectural Trim & Finish Work — door and window framing, reveal trim, wall transitions, column wraps, and edge guards
- Sign Fabrication & Display — frame construction, panel edging, and mounting brackets where a finished appearance is required
- Interior Construction — partition framing, corner guards, ceiling grid trim, and cabinet face framing
- Commercial Glazing & Storefronts — sill trim, threshold transitions, and curtainwall accent framing
- Marine & Coastal Applications — corrosion-resistant framing, trim, and structural accent components in saltwater environments
- Retail & Exhibit Fixtures — display framing, shelving supports, and kiosk structure
- Custom Metal Fabrication — general-purpose aluminum angle for weldments, assemblies, and brackets requiring anodize-quality finish
(No reviews yet)
Write a Review
2" X 2" X 1/8" X 20' 6063-T52 MF ARCH ANGLE - 11-63-315
Call for more information: 803-329-6299
Click here for map: 1439-51 Dave Lyle Blvd, Rock Hill, SC. 29730
This 2" x 2" x 1/8" aluminum architectural angle delivers the clean lines and consistent surface quality required for trim, edging, framing, and finish-work applications where appearance is as important as function. Extruded from 6063-T52 aluminum, this equal-leg angle is specifically produced to architectural tolerances, featuring a sharper inside corner radius than standard structural angle — a defining characteristic that results in tighter, more refined joints and transitions in visible installations.
The 6063 alloy is widely regarded as the premier choice for architectural aluminum extrusions. Its high magnesium-silicon content produces a smooth, consistent surface that accepts anodizing, powder coating, and paint finishes with excellent adhesion and uniformity — making it the go-to specification for work where the aluminum will remain exposed or receive a decorative finish. The T52 temper designates material that has been cooled from the extrusion process and stress relieved, producing a stable, dimensionally consistent profile well-suited for precision fitting and finishing trades.
Supplied in mill finish (MF), this angle arrives with the natural extruded aluminum surface intact, free of applied coatings, and ready for immediate fabrication, anodizing, or finishing as required by the application. The 20-foot bar length minimizes field splices in linear trim runs and reduces material waste on longer spans.
This angle is suited for light-duty structural support roles in non-primary framing but is principally specified for architectural, decorative, and finish applications rather than load-bearing structural service. For structural load-bearing angles, 6061-T6 should be considered.
Specifications:
| Attribute | Value |
|---|---|
| Part Number | 11-63-315 |
| Leg Size | 2 in × 2 in (equal leg) |
| Wall Thickness | 1/8 in (0.125 in) |
| Length | 20 ft (240 in) |
| Profile Type | Architectural Angle |
| Alloy | 6063 |
| Temper | T52 |
| Surface Finish | Mill Finish (MF) |
| Inside Corner | Sharp / Architectural Radius |
| Cross-Sectional Area | Approx. 0.484 in² |
| Weight (per bar) | Approx. 0.57 lb/ft × 20 ft ≈ 11.4 lbs |
| Governing Standard | ASTM B221 |
| Alloy Characteristics | High surface quality, excellent anodize response, good corrosion resistance |
Industries & Applications:
6063-T52 architectural aluminum angle is specified across construction, design, and fabrication trades wherever a clean aluminum profile is required:
- Architectural Trim & Finish Work — door and window framing, reveal trim, wall transitions, column wraps, and edge guards
- Sign Fabrication & Display — frame construction, panel edging, and mounting brackets where a finished appearance is required
- Interior Construction — partition framing, corner guards, ceiling grid trim, and cabinet face framing
- Commercial Glazing & Storefronts — sill trim, threshold transitions, and curtainwall accent framing
- Marine & Coastal Applications — corrosion-resistant framing, trim, and structural accent components in saltwater environments
- Retail & Exhibit Fixtures — display framing, shelving supports, and kiosk structure
- Custom Metal Fabrication — general-purpose aluminum angle for weldments, assemblies, and brackets requiring anodize-quality finish
